Multi Disc Cutter

Disc Cutters are a useful tool for any jeweller. They punch discs from sheet metal, but can also be used to punch holes in a number of different materials including metal, paper, card and leather. This 14 size Disc Cutting Set will cut a maximum of 0.7mm sheet, and contains the following cutter diameters: 3mm, 4.5mm, 5mm, 6mm, 7mm, 7.5mm, 8mm, 8.5mm, 10mm, 11mm, 12mm, 13mm, 14mm and 16mm. Remove all cutters before use. To operate, insert your metal sheet into centre slit under the circle required. Insert the corresponding cutter and strike with a hammer, preferably a brass mallet (997 3134). The metal disc will be stamped from the metal sheet and can be found on the underside of the tool. The disc stamped will be the same diameter as the cutter used. Made from steel. Please note, metal sheet should be annealed before stamping, and should be no greater than 0.7mm thick.